EPSON SC-T3000 / T5000 / T7000 / T3080 / T5080 / T7080 / T3050 / SC-P10000 / P20000 Chip Resetter

£49.95

How to use the resetter: The pins on the resetter should make good contact the terminals on the chip of the tank, be sure to press against the pins firmly. Once connected the LED light in the resetter will light up (starts out RED, and after 2-3 seconds will blink and then turn GREEN). GREEN means a successful reset. If the LED stays red, it means that the chip on the cartridge has not reset. If you allow the cartridge to go low and indicate "X" it won't reset.

PLEASE NOTE The body colour may vary. The images are just examples of the types of bodies used to fit the electronics inside.

used in:-

Epson SureColor SC-P10000
SC-P20000
SC-T3000
SC-T3000 w-o stand
SC-T3200
SC-T3200 w-o stand
SC-T3200-PS
SC-T5000
SC-T5200
SC-T5200 PS MFP
SC-T5200-PS
SC-T5200D
SC-T5200D-PS
SC-T5200DMFP
SC-T7000
SC-T7200
SC-T7200-PS
SC-T7200D
SC-T7200D-PS